3com 10014302 Manual De Usuario

stratum: The stratum level at which the local clock operates, which is in the range of 1 

to 15.

 

Using the ntp-service refclock-master command, you can set an external reference 

clock or the local clock to be the NTP master clock. Using the undo ntp-service 

refclock-master command, you can remove the settings of NTP master clock.

 

X.X.X.X is not specified, and stratum is 1.

This command can set an external reference clock or local clock as the NTP master 

clock providing reference for time synchronization of other devices. X.X.X.X 

represents the IP address, that is, 127.127.t.u, of the reference clock. If it has not 

been specified, the local clock works as the NTP master clock by default. With this 

command, you can specify the stratum level where the NTP master clock operates.

 

Set the local device to be the NTP master clock at stratum 3, which provides 

reference for the time synchronization of other peers.

 

[3Com] ntp-service refclock-master 3

ntp-service reliable authentication-keyid number

undo ntp-service reliable authentication-keyid number

System view

 

number: Key number in the range of 1 to 4294967295.

 

Using the ntp-service reliable authentication-keyid command, you can specify a 

key to be reliable. Using the undo ntp-service reliable authentication-keyid 

command, you can remove the current setting.

 

By default, no reliable authentication key is set. 

3Com Router Command Reference Guide Addendum for V1.2

78