3com 10014302 Manual De Usuario

Set the peer at 128.108.22.44 to be the synchronization source of the local device, 

allowing the remote peer to synchronize with the local clock. In addition, version 3 is 

adopted, and IP address of Ethernet 0 is used as the IP source address carried by 

the NTP messages.

 

[3Com] ntp-service unicast-peer 128.108.22.44 version 3 source-interface 

ntp-service unicast-server X.X.X.X [ version number | authentication-keyid keyid 

| source-interface { interface-name | interface-type interface-number } | priority ] * 

undo ntp-service unicast-server X.X.X.X

 

System view

 

X.X.X.X: IP address of the remote server.

 

version: Defines NTP version.

 

number: NTP version number in the range of 1 to 3.

 

authentication-keyid: Defines authentication key ID.

 

keyed: The key ID should be carried in the messages sent to the remote server, 

which is in the range of 1 to 4294967295.

 

source-interface: Specifies the interface name.

 

interface-name: Interface name. The IP address of the interface will be used as the 

source IP address of the NTP messages that the local device sends to the defined 

server.

 

interface-type: Interface type, which identifies an interface along with 

interface-number.

 

interface-number: Interface number, which identifies an interface along with 

interface-type.

 

priority: Specifies the server to be the preferred server.

 

3Com Router Command Reference Guide Addendum for V1.2

82