SMC Networks SMC7804WBRA Manual De Usuario

3-2

To access the Internet through the Barricade, you must configure the 
network settings of the computers on your LAN to use the same IP subnet 
as the Barricade. The default IP settings for the Barricade are:

IP Address: 192.168.2.1 

Subnet Mask: 255.255.255.0

Note: These settings can be changed to fit your network requirements, 

but you must first configure at least one computer

 

to access the 

Barricade’s web configuration interface in order to make the 
required changes. (See “Configuring the Barricade” on page 4-1 
for instruction on configuring the Barricade.)

You may find that the instructions in this section do not exactly match 
your version of Windows. This is because these steps and screen shots 
were created from Windows 98. Windows Millennium Edition is similar, 
but not identical, to Windows 98.

1. On the Windows desktop, 

click Start/Settings/Control Panel.