SMC Networks 2.4GHz/5GHz Manual De Usuario
Bridge Commands
7-73
• Where more than one port is assigned the highest priority,
the port with lowest numeric identifier will be enabled.
Example
Related Commands
bridge stp-port portfast
Use this command to set an interface to fast forwarding. Use the
no form to disable fast forwarding.
no form to disable fast forwarding.
Syntax
bridge stp-port portfast <port>
no bridge stp-port portfast <port>
no bridge stp-port portfast <port>
port - Specifies the port number on the wireless bridge.
(Range: 0, Ethernet interface; 1-16 wireless interface)
(Range: 0, Ethernet interface; 1-16 wireless interface)
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• This command is used to enable/disable the fast
spanning-tree mode for the selected port. In this mode,
ports skip the Discarding and Learning states, and proceed
straight to Forwarding.
ports skip the Discarding and Learning states, and proceed
straight to Forwarding.
AP(config)#bridge stp-port priority 1 64
AP(config)#
AP(config)#