SMC Networks 2.4GHz/5GHz Manual De Usuario

Descargar
Página de 322
Wireless Interface Commands
7-97
Example 
Wireless Interface Commands
The commands described in this section configure connection 
parameters for the  wireless interface.
AP#show interface ethernet
Ethernet Interface Information
========================================
IP Address          : 192.168.2.2
Subnet Mask         : 255.255.255.0
Default Gateway     : 192.168.1.253
Primary DNS         : 192.168.1.55
Secondary DNS       : 10.1.0.55
Admin status        : Up
Operational status  : Up
========================================
AP#
Command
Function
Mode Page
interface wireless Enters wireless interface 
configuration mode 
GC
description
Adds a description to the wireless 
interface 
IC-W
ssid 
Configures the service set identifier
IC-W
closed system
Prohibits access to clients without a 
pre-configured SSID
IC-W
speed
Configures the maximum data rate 
for transmitting unicast packets on 
the wireless interface
IC-W
channel
Configures the radio channel 
IC-W
turbo
Configures the 802.11a radio to use a 
faster proprietary modulation mode
IC-W
beacon-interval 
Configures the rate at which beacon 
signals are transmitted from the 
wireless bridge
IC-W