SMC Networks 2.4GHz/5GHz Manual De Usuario
Wireless Interface Commands
7-113
• To enable AES encryption, use the encryption command to
specify the key type, and use the key command to configure
a key for each wireless port.
a key for each wireless port.
• If WEP is enabled, all units in the wireless bridge network
must be configured with the same keys.
• The WEP key length specified in the encryption
command and the key command must match.
• The WEP key index, length and type configured on the local
wireless bridge must match those configured on other
wireless bridges.
wireless bridges.
• If AES is enabled, each wireless bridge link in the network
must be configured to use the same AES key
• The AES key type value entered using the key command
must be the same as the type specified in the encryption
command.
command.
Example
Related Commands
transmit-key
This command sets the index of the WEP key to be used for
encrypting data frames broadcast or multicast from the wireless
bridge.
encrypting data frames broadcast or multicast from the wireless
bridge.
Syntax
transmit-key <index>
index - Key index. (Range: 1-4)
Default Setting
1
AP(if-wireless a)#key wep 1 64 ascii 12345
AP(if-wireless a)#key wep 2 64 ascii abcde
AP(if-wireless a)#
AP(if-wireless a)#key wep 2 64 ascii abcde
AP(if-wireless a)#