SMC Networks 2.4GHz/5GHz Manual De Usuario

Command Line Interface

7-122

Example

IAPP Commands

The command described in this section enables the protocol
signaling required to ensure the successful handover of wireless
clients roaming between different 802.11f-compliant access
points. In other words, the 802.11f protocol can ensure
successful roaming between access points in a multi-vendor
environment.

iapp

This command enables the protocol signaling required to hand
over wireless clients roaming between different 802.11f-compliant
access points. Use the no form to disable 802.11f signaling.

Syntax

iapp
no iapp

AP#show station

Station Table Information
===========================================================
802.11a Channel : 56

No 802.11a Channel Stations.
802.11g Channel : 11
802.11g Channel Station Table
Station Address : 00-04-E2-41-C2-9D VLAN ID: 0
Authenticated Associated Forwarding    KeyType
TRUE   TRUE     TRUE    NONE
Counters:pkts Tx /   Rx bytes Tx / Rx
   4/   0 1440/ 0
Time:Associated LastAssoc LastDisAssoc LastAuth
   143854    0 0    0
===========================================================
AP#