SMC Networks 2.4GHz/5GHz Manual De Usuario
A-1
Appendix A
Troubleshooting
Check the following items before you contact local Technical
Support.
Support.
1. If wireless bridge units do not associate with each other,
check the following:
•
Check the power injector LED for each bridge unit to be
sure that power is being supplied
sure that power is being supplied
•
Be sure that antennas in the link are properly aligned.
•
Be sure that channel settings match on all bridges
•
If encryption is enabled, ensure that all bridge links are
configured with the same encryption keys.
configured with the same encryption keys.
2. If you experience poor performance (high packet loss rate)
over the wireless bridge link:
•
Check that the range of the link is within the limits for the
antennas used.
antennas used.
•
Be sure that antennas in the link are properly aligned.
•
Check that there is an unobstructed radio line-of-sight
between the antennas.
between the antennas.
•
Be sure there is no interference from other radio sources.
Try setting the bridge link to another radio channel.
Try setting the bridge link to another radio channel.
•
Be sure there is no other radio transmitter too close to
either antenna. If necessary, move the antennas to
another location.
either antenna. If necessary, move the antennas to
another location.