SMC Networks 2.4GHz/5GHz Manual De Usuario

Descargar
Página de 322
Radio Path Planning
3-7
Weather Conditions
When planning wireless bridge links, you must take into account 
any extreme weather conditions that are known to affect your 
location. Consider these factors:
Temperature — The wireless bridge is tested for normal 
operation in temperatures from -33°C to 55°C. Operating in 
temperatures outside of this range may cause the unit to fail. 
Wind Velocity — The wireless bridge can operate in winds up 
to 90 MPH and survive higher wind speeds up to 125 MPH. 
You must consider the known maximum wind velocity and 
direction at the site and be sure that any supporting structure, 
such as a pole, mast, or tower, is built to withstand this force.
Lightning — The wireless bridge includes its own built-in 
lightning protection. However, you should make sure that the 
unit, any supporting structure, and cables are all properly 
grounded. Additional protection using lightning rods, lightning 
arrestors, or surge suppressors may also be employed. 
Rain — The wireless bridge is weatherproofed against rain. 
Also, prolonged heavy rain has no significant effect on the 
radio signal. However, it is recommended to apply 
weatherproof sealing tape around the Ethernet port and 
antenna connectors for extra protection. If moisture enters a 
connector, it may cause a degradation in performance or even 
a complete failure of the link.
Snow and Ice — Falling snow, like rain, has no significant 
effect on the radio signal. However, a build up of snow or ice 
on antennas may cause the link to fail. In this case, the snow 
or ice has to be cleared from the antennas to restore operation 
of the link.