SMC Networks 2.4GHz/5GHz Manual De Usuario
Initial Configuration
5-10
5. Security (802.11g) – Set the Authentication Type to “Open
System” to allow open access without authentication, or
“Shared Key” to require authentication based on a shared key.
Enable Wired Equivalent Privacy (WEP) to encrypt data
transmissions. To configure other security features use the
Advanced Setup menu as described in Chapter 5.
“Shared Key” to require authentication based on a shared key.
Enable Wired Equivalent Privacy (WEP) to encrypt data
transmissions. To configure other security features use the
Advanced Setup menu as described in Chapter 5.
Authentication Type – Use “Open System” to allow open access
to all wireless clients without performing authentication, or
“Shared Key” to perform authentication based on a shared key
that has been distributed to all stations. (Default: Open System)
to all wireless clients without performing authentication, or
“Shared Key” to perform authentication based on a shared key
that has been distributed to all stations. (Default: Open System)
WEP – Wired Equivalent Privacy is used to encrypt transmissions
passing between wireless clients and the access point. (Default:
Disabled)
passing between wireless clients and the access point. (Default:
Disabled)
Shared Key Setup – If you select “Shared Key” authentication
type or enable WEP, then you also need to configure the shared
key by selecting 64-bit or 128-bit key type, and entering a
type or enable WEP, then you also need to configure the shared
key by selecting 64-bit or 128-bit key type, and entering a