SMC Networks 2.4GHz/5GHz Manual De Usuario
Advanced Configuration
6-3
Advanced Configuration
The Advanced Configuration pages include the following options.
Menu
Description
Page
System
Configures basic administrative and client
access
access
Identification
Specifies the system name, location and
contact information
contact information
TCP / IP Settings Configures the IP address, subnet mask,
gateway, and domain name servers
Radius
Configures the RADIUS server for wireless
client authentication
client authentication
PPPoE Settings
Configures PPPoE on the Ethernet interface
for a connection to an ISP
for a connection to an ISP
Authentication
Configures 802.1X client authentication and
MAC address authentication
MAC address authentication
Filter Control
Enables VLAN support and filters traffic
matching specific Ethernet protocol types
matching specific Ethernet protocol types
SNMP
Controls access to this wireless bridge from
management stations using SNMP, as well
as the hosts that will receive trap messages
management stations using SNMP, as well
as the hosts that will receive trap messages
Administration
Configures user name and password for
management access; upgrades software
from local file, FTP or TFTP server; resets
configuration settings to factory defaults;
and resets the wireless bridge
management access; upgrades software
from local file, FTP or TFTP server; resets
configuration settings to factory defaults;
and resets the wireless bridge
System Log
Controls logging of error messages; sets the
system clock via SNTP server or manual
configuration
system clock via SNTP server or manual
configuration
WDS
Sets the MAC addresses of other units in the
wireless bridge network
wireless bridge network
Bridge
Sets the time for aging out entries in the
bridge MAC address table
bridge MAC address table
STP
Configures Spanning Tree Protocol
parameters
parameters