Emerson PMT1 Manual De Usuario
Monitor:
Help Commands
PmT1 and PmE1 User’s Manual
10002367-02
8-10
Also refer to the function BootUp on page 8-37.
HELP COMMANDS
help
Use the help command to view the description of the monitor command specified by
name. The full name of the command must be given.
name. The full name of the command must be given.
Description:
help name
For instructions on editing command lines, type
help editor
.
For a list of command-line functions, type
help functions
.
For a detailed memory map, type
help memmap
.
MEMORY/REGISTER COMMANDS
For some memory commands, the data size is determined by the following flags:
Description:
The flag -b is for data in 8-bit bytes.
The flag -w is for data in 16-bit words.
The flag -l is for data in 32-bit long words.
checksummem
reads bytecount bytes starting at address source and computes the checksum for that
region of memory. The checksum is the 16-bit sum of the bytes in the memory block.
region of memory. The checksum is the 16-bit sum of the bytes in the memory block.
Description:
checksummem source bytecount
clearmem
clears bytecount bytes starting at address source.
Description:
clearmem source bytecount
cmpmem
compares bytecount bytes at the source address with those at the destination address. Any
differences are displayed.
differences are displayed.
Description:
cmpmem source destination bytecount
copymem
copies bytecount bytes from the source address to the destination address.