Eicon Networks 2440 Manual De Usuario
Command Line Reference
Page 85
Time Protocol Commands
SET TIMEPROTOCOL SERVER <timeServer>
Defines the Internet address of a time server. The device will then periodically fetch the date
and time from the timer server to update its internal clock. The timeserver is enabled by default.
and time from the timer server to update its internal clock. The timeserver is enabled by default.
SET TIMEPROTOCOL ZONE <timeZoneDiff>
Defines the difference, in hours, between your time zone and Greenwich Mean Time (GMT).
ENABLE TIMEPROTOCOL
DISABLE TIMEPROTOCOL
DISABLE TIMEPROTOCOL
Enables/disables time synchronization with a time server. If enables, the device will periodically
fetch the date and time from the timer server to update its internal clock. The time server
address is defined with SET TIMEPROTOCOL SERVER. By default the time is fetched from
your computer.
fetch the date and time from the timer server to update its internal clock. The time server
address is defined with SET TIMEPROTOCOL SERVER. By default the time is fetched from
your computer.
SHOW TIMEPROTOCOL CONFIGURATION
Displays the time protocol settings.
<timeServer>
address of the time
server.
server.
Range
-12 to 12.