GarrettCom 6K32F Manual De Usuario

Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08) 

 

 
The New PoE RJ-45 ports act similar to regular RJ-45 ports, except they have capability 

of providing power on each port to power up the PD devices, per the IEEE802.3af PoE 

standard. Only  4 x RJ-45 (10/100) ports max. support POE(Power Inside) option in one 

rack mounted 6K-unit. The power inside PoE option is factory configured and equipped 

with the necessary power option to support four 802.3af PoE pd devices. The 4-RJ45 

POE module are also available with mix –n-match with fiber modules. Please check the 

ordering information Sec.1.2. for all the various PI6K PoE modules option. 

 

The LEDs on 6KP8-RJ45- PoE module are slightly different compared to 

regular (non-PoE) RJ-45 modules as shown in Fig 2. When the PoE port is in use, the 

PoE LED is ON when connected properly to an 803.af compliant PD device on that port. 

When non-PoE devices are connected, the PoE LED is OFF. Operation of Ethernet data 

traffic is not affected by PoE. 

LINK and ACTIVITY LEDS are combined on the PoE modules into one LED 

that is marked as LINK/ACT, as shown in the diagram. 

 

2.2.3b    PoE(Power Pass-through), model P6KP8-RJ45 (MDIX), 10/100Mb 8-port 
 

The PoE (Power-pass-through) RJ-45 ports act similar to regular RJ-45 ports, 

except they have capability of providing power on each port to power up the PD devices, 

per the IEEE802.3af PoE standard. The Power Pass-through PoE modules are totally 

dependent upon the powerful  -48VDC input power supply  to support more  RJ-45 

(10/100) ports. Each port requires at least 15watts to power up the PoE PD devices max. 

One PoE module can be configured in the A, B, C or D slot of any 6K s with 

-48vdc power input. The PoE modules are also available with mix & match fiber 

 

15 

.

.