Furuno FELCOM 500 Manual De Usuario

This chapter shows how to enter basic settings, done by the installation technician. For the net-
work setting, request to an administrator of the ship network. (Refer to the Operator's Manual for 
details.)

The SIM card is required to communicate via a satellite, but not required for the following system 
settings. "(SIM): No SIM detected" appears in the Web software screen. Disregard the warning.

1. Turn on the PC and insert the CD-ROM (supplied with accessories) in the PC.
2. Open the CD-ROM and copy "FELCOM_FB" shortcut icon to the desktop of the PC.

This shortcut icon accesses the FELCOM 500/FELCOM 250 (IP address 192.168.1.1) 
through the Internet Explorer.

3. Connect the PC to the Communication unit with a LAN cable.
4. Turn on the Communication unit. The initialization begins. Wait until all STATUS LEDs light. 

During this time, the PC cannot access the Communication unit. Wait for a while.

5. To set the IP address of the PC, select "Obtain an IP address automatically" in the Internet 

Protocol (TCP/IP) Preperties. If you set manually, set IP address according to the IP address 
of the communication unit (default 192. 168.1.1).

6. Double-click the "FELCOM_FB" shortcut icon on the PC desktop.

SIM CARD INSIDE

POWER OFF BEFORE INSERTING

OR REMOVING SIM 

―

○

POWER

○

I

POWER

1

TX

2

3

4

STATUS

Inmarsat FleetBroadband

READY

Power switch

Communication unit

FELCOM_FB