Gateway 9315 Manual De Usuario
77
www.gateway.com
5
If you are installing a processor, proceed to
- OR -
If you are replacing a processor, loosen the four captive screws on the corners of the
heat sink, then twist the heat sink slightly to break the seal between the heat sink
and remove it from the processor.
heat sink, then twist the heat sink slightly to break the seal between the heat sink
and remove it from the processor.
6
Rotate the processor release lever a full 135° to release the processor, then lift the
processor out of the socket.
processor out of the socket.
Caution
Do not force the heat sink from the processor. Doing so could damage
the processor.
the processor.