Gateway WBR-100 Manual De Usuario
49
Advanced features
www.gateway.com
11
Close the PC Database window to return to the Advanced
Features/Configuration window.
Features/Configuration window.
Changing router options
To change router Options:
1
Click
Options
in the Advanced Configuration section. The Options window
opens.
2
In the Backup DNS section, type the backup DNS IP addresses (obtained
from your ISP) if the primary DNS is unavailable.
from your ISP) if the primary DNS is unavailable.
3
In the TFTP section, click the
Enable Firmware Upgrade using TFTP
check box.
If enabled, TFTP (Trivial FTP) can be used to upgrade the router firmware.
Instructions for using TFTP are included with the firmware file.
Instructions for using TFTP are included with the firmware file.
4
In the UPnP section, click the
Enable UPnP Services
check box. If enabled,
new equipment will be automatically detected and configured as it is
attached to your LAN. This is only supported by Windows Me, Windows
XP and later.
attached to your LAN. This is only supported by Windows Me, Windows
XP and later.
Checking the
Allow Configuration
check box lets you change the
configuration of devices that are automatically detected and configured.
Leaving it unchecked prevents this.
Leaving it unchecked prevents this.