Polycom 4300T Manual De Usuario

 Configuring the 4300T

3 - 29

The bandwidth is specified in kbps and if it is set to 0, bandwidth 

management is not enforced. Only calls with media traversing the 4300T 

is counted towards the bandwidth maximum.

The Current payload bandwidth calculates the current video traffic, 

without IP overhead, traversing the Appliance. The Estimated total 

bandwidth calculates the total video traffic, plus IP overhead, traversing 

the Appliance.

The H.323 Max Aliases limits the number of aliases that are allowed to 

register with the Voice Appliance. If this number is exceeded when a 

client tries to register, the registration will be rejected. If the value is set to 

0, the maximum is not enforced.

The SIP LAN Side Gateway is used to configure a LAN side SIP gateway 

to which calls that are not for a registered phone can be sent. The name of 

the gateway is the name that is configured for the gateway in the 

soft-switch and the IP address is the address where the gateway can be 

reached. 

Press Submit.

It is not necessary to configure VoIP subnet routing if all of your voice and 

video devices are installed on the same IP subnet as the 4300T.  In some 

installations the voice  and video devices are located in different subnets than 

the 4300T and connected via intermediate routers.  In these instances it is 

necessary to configure a return path in the 4300T by specifying the 

intermediate router who knows how to reach the voice devices.  This router 

must be reachable by the 4300T. 

IP Phones

Router

WAN

EM007B