Planet Audio ADE-4400v3 Manual De Usuario

Descargar
Página de 93
 
Following is a description of the different options:   
1. Key 
Length: Select 64-bit WEP or 128-bit WEP to use data encryption.   
2. Key 
Format: Select the ASCII or Hex format for encryption. 
3. Default 
Tx 
Key: 
Select Key 1 ~ 4 for your default Encryption Key. 
4.  Network Key 1 to 4: Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit 
encryption keys to fill out WEP keys box. Or enter 13 ASCII characters or 26 
hexadecimal digits for 128-bit encryption keys to fill out WEP keys box. The system 
allows you to type in 4 kinds of the WEP key.   
Click "Apply Changes" to save the wireless security options and then click “Close” to 
return the Security Setup screen. 
Use 802.1x Authentication: Enable the 802.1x Authentication and select WEP 64bits or 
WEP 128bits for 802.1x authentication.   
Radius Port: Enter the port number of the authentication server. The default port number is 
1812.  
Radius Server IP Address: Enter the IP Address of the authentication server.   
Radius Password: Enter the same key as the Radius server’s.   
Click "Apply Changes" again to save the wireless security options and make the change 
take effect.   
WPA(TKIP) / WPA2(AES):   
Wi-Fi Protected Access, encrypts data frames before transmitting over the wireless network. 
WPA Authentication Mode: Select the Enterprise (RADIUS) or Personal (Pre-Shared 
Key).
 
                                                                                                                       34