Planet Audio ADE-4400v3 Manual De Usuario

Rule Action: Select the Deny or Allow for your rules.

Direction: Select the Outgoing or Incoming.

Protocol: Set protocol type to be blocked or allowed.

Src IP Address / Mask / Port: Set the subnet of source side computers to be denied /

allowed access to the destination side computers. An individual source IP address can be

designated for filtering.

If all IP addresses must be filtered, leave this box blank. Enter the IP/subnet mask address

in the form of XXX.XXX.XXX.XXX. Example: The IP address is 192.168.1.21 and the net

mask 255.255.255.0. The IP address 0.0.0.0 and the net mask 255.255.255.255 is not

care.

Dst IP Address / Mask / Port: Set the subnet of destination side computers to be

denied/allowed access to the source side computers. The destination IP address to be

filtered is set. If all IP addresses must be filtered, leave this box blank. Enter the IP/subnet

mask address in the form of XXX.XXX.XXX.XXX. Example: The IP address is

211.95.68.121 and the net mask 255.255.255.0.The IP address 0.0.0.0 and the net mask

255.255.255.255 is not care.

Click “Add” button to add this filtering rule.

Note: Please Commit/Reboot if you want to make this settings effective immediately

3.6.2.2 Mac Filtering

Use the MAC filters to deny computers within the local area network from accessing the

Internet. Entries in Filter Table are used to restrict certain types of data packets from your

local network to Internet through the Gateway. Use of such filters can be helpful in securing

or restricting your local network.