RAD Data comm ASMi-52 Manual De Usuario
Installation and Operation Manual
Chapter 4 Configuration
ASMi-52 Ver. 2.5
Configuring ASMi-52 for Management
4-3
Configuring the Host Parameters
ASMi-52 can be managed by a network management station, which is located on
the LAN connected to the 10/100BaseT port. In order to establish a proper
connection, it is necessary to configure the following: host IP address, subnet
mask, default gateway, its trap, read, and write communities.
the LAN connected to the 10/100BaseT port. In order to establish a proper
connection, it is necessary to configure the following: host IP address, subnet
mask, default gateway, its trap, read, and write communities.
To define the IP parameters:
1. From the Host IP menu (Main menu > Configuration > System Configuration
1. From the Host IP menu (Main menu > Configuration > System Configuration
> Management > Host IP), type the following:
1
to define the host IP address
2
to define the subnet mask
3
to set the default gateway IP address
4
to enter the name of a community with read-only authorization
5
to enter the name of a community with write authorization
6
to enter the name of a community to which ASMi-52 will send traps.
2. Press <Enter>.
3. Press <Esc> to return to the Management menu (see
3. Press <Esc> to return to the Management menu (see
Figure 4-1
).
4. From the Management menu, select Save to save your changes.
ASMi-52
Host IP
1. Host IP address (172.17.161.73)
2. Host IP mask (255.255.255.0)
3. Host default gateway (172.17.161.1)
4. Read community (public)
5. Write community (public)
6. Trap community (public)
1. Host IP address (172.17.161.73)
2. Host IP mask (255.255.255.0)
3. Host default gateway (172.17.161.1)
4. Read community (public)
5. Write community (public)
6. Trap community (public)
>
ESC-prev. menu; !-main menu; &-exit; @-scroll
Figure 4-4. Host IP Menu
Configuring the Network Managers
Define or modify the network management stations to which the SNMP agent of
ASMi-52 will send traps. Up to ten managers can be defined. Entering the IP
address and corresponding subnet mask to define each management station.
ASMi-52 will send traps. Up to ten managers can be defined. Entering the IP
address and corresponding subnet mask to define each management station.
To configure the network managers:
1. Display the Manager List menu. (Main menu > Configuration > System
1. Display the Manager List menu. (Main menu > Configuration > System
Configuration > Management > Manager List).
The Manager List menu appears (see
Figure 4-5
).
2. From the Manager List menu, type a number corresponding to the network
management station that you intend to define or modify, and enter its new IP
address.
address.