RAD Data comm ASMi-52 Manual De Usuario
Chapter 4 Configuration
Installation and Operation Manual
4-14
Configuring ASMi-52 System Parameters
ASMi-52 Ver. 2.5
Configuring the Master Clock
ASMi-52 modems support receive, external and internal clock modes.
When configured to the internal or external clock, ASMi-52 modem operates as an
When configured to the internal or external clock, ASMi-52 modem operates as an
STU-C unit. When configured to the receive clock, ASMi-52 operates as an STU-R
unit.
unit.
To configure the master clock:
1. From the Master Clock menu (Main menu > Configuration > System
1. From the Master Clock menu (Main menu > Configuration > System
Configuration > Master Clock), select the appropriate clock by choosing
Receive
Receive
, Internal, External E1 or External IR (see
Figure 4-18
).
The System Configuration menu returns.
2. From the System Configuration menu, select Save to save the changes.
ASMi-52
Master clock (Internal)
1. Receive
2. Internal
3. External E1
4. External IR
1. Receive
2. Internal
3. External E1
4. External IR
>
ESC-prev. menu; !-main menu; &-exit; @-scroll
Figure 4-18. Master Clock Menu
Configuring Local Card Mode
Each multiplexer unit may be configured as a single parameter by the local/remote
card mode. For example, E1 + IR (Serial DTE) Interface may be configured as E1
or as IR (Serial DTE). The multiplexer can be configured as single but it will not
have the characteristics of a multiplexer unit.
For available options and combinations of parameters that complies with
multiplexer conditions, see
or as IR (Serial DTE). The multiplexer can be configured as single but it will not
have the characteristics of a multiplexer unit.
For available options and combinations of parameters that complies with
multiplexer conditions, see
Table 1-4
.
To configure local card mode:
1. From the Local menu (Main menu > Configuration > System Configuration >
1. From the Local menu (Main menu > Configuration > System Configuration >
Local Card Mode), select the appropriate configuration by choosing E1, DTE,
E1 + LAN
E1 + LAN
, E1 + V35, or V35 + LAN (see
Figure 4-19
).
The System Configuration menu returns.
2. From the System Configuration menu, select Save to save the changes