RAD Data comm E1/T1 Manual De Usuario
Chapter 5 Setup Menu
FCD-IPM Installation and Operation Manual
5-18 Routing/Bridging
Menu
Table 5-9. IP Address Pool Setting (DHCP) (Cont.)
Values Description
DHCP
This protocol is an extension to BOOTP and permits FCD-IPM to
supply not only an IP address but also additional parameters, such as
Default Gateway, DNS server addresses etc. FCD-IPM supplies these
Default Gateway, DNS server addresses etc. FCD-IPM supplies these
parameters to the client's workstation. In contrast to BOOTP, DHCP
supplies these parameters on a temporary basis. FCD-IPM using DHCP
checks on the workstation periodically. If the workstation is not using
checks on the workstation periodically. If the workstation is not using
the IP address, the IP address can be supplied to other workstations
later.
FCD-IPM supports all these mechanisms simultaneously.
IP Address Pool
Select this option to define IP address information.
IP Address Pool
Select this option to define IP address information.
IP ADDRESS POOL (Device name FCD-IPM)
----------------
Pool of IP addresses dynamically allocated by the device working as Remote
Access server or DHCP server to workstations over the WAN/LAN.
Allocation can be made via DHCP, BOOTP, and PPP-IPCP request.
1. IP Address 001.001.001.001 – 001.001.001.005 Mask: 255.255.255.000
Default gateway: 001.001.001.001
Primary DNS: 194.090.001.005, Secondary DNS: 000.000.000.000
Interface: LAN 1
OPTIONS: C-Clear all, E-Edit, D-Delete, A-Add
Press one of the above or ESC to return to previous screen:
Figure 5-19. IP Address Pool Menu
You can define up to five entries. Each entry contains the parameters shown in