AT&T 555-230-223 Manual De Usuario

Installation

bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb

bbbbb

a. At the 

prompt, type 

craft 

and press 

Return 

. (If the login

prompt is not displayed, press 

Return 

once or twice.)

To send the information to the DEFINITY LAN Gateway
system, the 

Return 

key (located on the right side of your

keyboard) must be pressed after you type a command or a
response to a prompt. On some keyboards, this key is
labeled 

Enter 

instead of 

Return 

. If your keyboard has both a

Return 

key and an 

Enter 

key (as on the 513 and 615

keyboards), use the 

Return 

key.

The system responds with the 

prompt.

b. Enter the default password for the craft login.

The system responds with the prompt: 

c. Enter one of the following:

513 

for a 513 BCT or 715 BCT; enter 

513 

also for a 610/615

BCT or a PC with a 513 emulation package.  (Since 513 is
the default, just press 

Return 

to select it.)

4410 

for a 4410 or 5410 terminal; enter 

4410 

also for a

610/615 BCT or a PC with a 4410 emulation package.

4425 

for a 4425 or 5425 terminal

5420 

for a 5420 or 4415 terminal

g3-ma 

for a G3-MA terminal

vt220 

If the terminal and modems (if applicable) are connected properly
and the options are set correctly, the system responds with the
DEFINITY LAN Gateway main menu.

4. Place the labels supplied with the DEFINITY LAN Gateway system

hardware as follows:

a. Place the label containing the DEFINITY LAN Gateway system

shutdown warning next to the cabinet Power switch.

b. Place the tape maintenance log label near the system assembly.

5. Give the program (original) tape to the DEFINITY LAN Gateway system

administrator.  The blank tape that came with the system will be installed
in the drive later in this chapter when the system is backed up.

Issue 1  January 1996