Avocent PM IPDU Manual De Usuario

Collect the following equipment prior to installing and configuring the PM IPDU in 
standalone configuration: 

•

One or more RJ-45 to RJ-45 straight-through cables

•

An RJ-45 to DB-9F straight-through adaptor

•

A PC running a terminal emulation program

 

If your PM IPDU model does not have a fixed power input cable, it may ship with a modular cable. 
Depending on your site’s location, the modular input power cables included in the box vary.

PM IPDU Quick Installation Guide (QIG)

Basic installation guide in printed format.

RJ-45 to RJ-45 7ft. straight through 
CAT5 cable 

Used for the following:
Along with an adaptor, to connect a terminal or PC to the IN port.
To connect to a Cyclades console or KVM management device. 
To connect to another PM IPDU in a daisy chain.

RJ-45 to DB-9F straight-through adaptor

Along with an RJ-45 cable, used to connect a terminal or PC to a 
PC’s COM port.

RJ-45 loopback connector

Used to gain temporary access to the PM IPDU.

PM IPDU to DSR switch cable adaptor

Used to connect a PM IPDU to an Avocent switch’s SPC port.

Mounting brackets and screws (2 spares) 
for PM10 IPDU and PM10i IPDU

Use to mount the Cyclades PM10 IPDU and PM10i IPDU to a 
rack or wall.