Avocent PM IPDU Manual De Usuario

20        Cyclades PM IPDU Installer/Administrator/User Guide

To delete the user “rog”, enter:

The display command allows logical inversion of the 2-digit, 7-segment display. The purpose of 
this command is to allow a PM IPDU to be mounted upside-down. This command is available to 
the admin user only.

NOTE: The decimal point will be at the top of the display when the PM IPDU is mounted upside down.

On the PM42 IPDU, this command either allows you to manually step through the current level 
views of each bank of outlets, or to set an interval for the current level views to automatically be 
displayed.

NOTE: The display on the PM42 IPDU may be physically rotated.

For single phase PM IPDUs:

display [<IPDU#>|<IPDU_ID> [0|180]]

For the PM42 IPDU:

display [<IPDU#>|<IPDU_ID> [Imanual|[Iauto <cycle_time>]]|[Vmanual|[Vauto 

<cycle_time>]]]

-or-

display

pm>deluser rog

no argument

Show display status of all PM IPDUs in the daisy chain

<IPDU#>

Number of the PM IPDU in the chain

<IPDU_ID>

Identification string previously set by the id command

0

Normal mode (default)

180

Inverted display