Avocent PM IPDU Manual De Usuario

Chapter 3: Accessing the PM IPDU via the Command Line Interface        29

without a parameter reboots the first unit in a chain, not all the units in a chain. This command is 
available to the admin user only.

reboot [<IPDU#>|<IPDU_ID>]

To reboot the first unit of the chain, or to reboot the unit in standalone mode, enter:

To reboot the a specific IPDU in the chain (IPDU 2 shown), enter:

The restore command restores the configuration currently saved in Flash. This command is 
available to the admin user only.

restore

N/A

To restore the configuration currently saved in Flash, enter:

The save command saves the current configuration in the Flash device built in to all PM IPDU 
units. This command saves the username/password database and the specific information 
pertaining to each outlet such as outlet name, outlet assignments and outlet state. This command is 
available to the admin user only.

<IPDU#>

IPDU number in a daisy chain

<IPDU_ID>

Identification string previously set by the id command

pm>reboot

pm>reboot 2

pm>restore