Buffalo Technology WBMR-G54 Manual De Usuario

WBMR-G54 Wireless ADSL Router User Guide 

Filter rules in the Router are put in place to allow or block specified traffic. The Filter Rules however can be used in a 
single direction to examine and then Allow or Deny traffic for Inbound (WAN to LAN) or Outbound (LAN to WAN) 
routed data. The rules are based on IP address and TCP/UDP port.  

Configure the filter rules as desired and click the Apply button to create the rule. The newly created rule appears listed 
in the Outbound Filter List at the bottom of the window. The table below describes the various parameters that are 
configured for the filter rules. 

 

To modify any previously created filter rule, click on the note pad icon in the right hand column of the Filter List for the 
set you want to configure. Adjust the settings as desired and click the Apply button to put the new settings into effect. 

First determine the direction of the traffic you want the rule to filter. To filter WAN to LAN traffic, select the Inbound 
Filter option. Any new Inbound Filter rules created will appear in the list. Likewise, should you to filter LAN to WAN 
traffic, create an Outbound Filter rule. 

 

64