Black Box LR1112A-T1/E1 Manual De Usuario

For IPSec only – when you create an outbound tunnel, an inbound tunnel is automatically created. The inbound tunnel applies the name that
you provide for the outbound tunnel and adds the prefix “IN” to the name.

message: Default proposal created with priority1-esp-3des-sha1-tunnel and activated.

Black Box1/configure/crypto/ipsec/policy Black Box2 172.16.0.2> proposal 1

Black Box1/configure/crypto/ipsec/policy Black Box2 172.16.0.2/proposal 1> 

encryption-algorithm aes256-cbc

Black Box1/configure/crypto/ipsec/policy Black Box2 172.16.0.2/proposal 1> exit

Black Box1/configure/crypto/ipsec/policy Black Box2 172.16.0.2> exit

Using the 

show crypto ipsec policy all

 command.

Black Box1/configure> firewall internet

Black Box1/configure/firewall internet> policy 1000 in service ike self

Black Box1/configure/firewall internet/policy 1000 in> exit

Black Box1/configure/firewall internet> exit

Step 8.2: Display firewall policies in the internet map (applicable only if firewall license is enabled)
Black Box1> show firewall policy internet

Advanced: S - Self Traffic, F - Ftp-Filter, H - Http-Filter,

          R - Rpc-Filter, N - Nat-Ip/Nat-Pool, L - Logging,

          E - Policy Enabled, M - Smtp-Filter

Pri  Dir Source Addr        Destination Addr   Sport Dport Proto Action Advanced

---  --- -----------        ----------------   ----------------- ------ --------

1000 in  any                any                ike               PERMIT SE

1024 out any                any                any   any   any   PERMIT SE