Cabletron Systems 2.2 Manual De Usuario

4-1

Viewing WAN Interface Status; configuring the synchronous and T1 connection; displaying the WAN 
logical settings; Viewing the Wan Port AdminStatus; enabling and disabling WAN interfaces; displaying 
Synchronous port statistics

This chapter describes the options available from the WAN Status menu when a 
WAN BRIM is installed in a device. This option allows you to set up and view the 
connections for a WAN BRIM, and view protocol and synchronous port statistics. 

The following windows are available from the WAN Status menu:

¥

The WAN Interface Status window displays the conÞguration settings of the 
two available WAN ports (Synchronous and T1); see 

, 

¥

The WAN Logical View window displays status information about the logical 
interface(s) that comprise your physical WAN port; see 

¥

The Admin/Status window displays status information for your WAN port; 
see 

, for more information. 

Depending on the type of port that is active, the Admin/Status window for the 
Synchronous port (

) or the T1 interfaces (

) will display.

¥

The Synchronous Port Statistics window displays the traffic going through 
the Synchronous port on your WAN BRIM. This menu option will only be 
available when the Synchronous Port is configured as the active port. See 

1.

Click on Device in the Chassis View menu bar to access the Device menu.

2.

Click on WAN Status and then right to the appropriate selection. When you 
select one of these options, the associated WAN Status window will appear.