Black Box LR5200A-R2 Manual De Usuario

Applications

The following steps must be performed on the router connected to LAN #2.

IPX Routing Disabled

Location: Main

Configuration

IPX Routing Set-up

IPX Routing

Disabling IPX routing allows the IPX frame types to be modified.

Configuration:

IPX Routing does not need to be disabled in order to change the defined

Note

network numbers on a PPP router.

IPX Frame Types

Location: Main

Configuration

LAN Set-up

LAN IPX Set-up

Ethernet-II Frames

RAW 802.3 Frames

IEEE 802.2 Frames

802.2 SNAP Frames

Define the IPX network number for the appropriate frame type. Note

that IPX network numbers must be unique. If more than one frame

type is to be used, each frame type must have a unique IPX network

number. There must be no duplicate IPX network numbers within your

entire IPX routed network they must all be unique. The IPX network

numbers may be any value from 0 to FFFFFFFF HEX.

IPX Routing Enabled

Location: Main

Configuration

IPX Routing Set-up

IPX Routing

IPX routing must be re-enabled to allow the router to operate as an

IPX router with the newly defined IPX network numbers.

All connected router IPX routers must have IPX routing enabled for

IPX routing to take place between the LANs. When one of the routers

on a network has IPX routing disabled, all of the router IPX routers will

become bridges only for IPX frames.