Bay Technical Associates 5218H Manual De Usuario
PROBLEM: CAN'T RECEIVE DATA FROM PERIPHERAL PORTS
CAUSE: Wrong peripheral port selected.
SOLUTION: If in Modes 1, 4, or 5, make sure the
SOLUTION: If in Modes 1, 4, or 5, make sure the
host device sends the correct selection sequence
and/or request for message command. See
Section 5.2.
and/or request for message command. See
Section 5.2.
CAUSE: Peripheral device's cable.
SOLUTION: Verify that the Tx and Rx signals as well
SOLUTION: Verify that the Tx and Rx signals as well
the handshake signals for the peripheral device
are connected to the correct signals on the H-
Series multiport. See
are connected to the correct signals on the H-
Series multiport. See
Section 4.
CAUSE: Wrong Mode of Operation.
SOLUTION: Please review how to operate in the
SOLUTION: Please review how to operate in the
various modes and verify that the Mode of
Operation you are operating in is the correct one
for your application.
Operation you are operating in is the correct one
for your application.