ZyXEL Communications nbg-418n Manual De Usuario
Chapter 5 Tutorials
NBG-418N User’s Guide
61
5.3 Enable and Configure Wireless Security without WPS
on your NBG-418N
on your NBG-418N
This example shows you how to configure wireless security settings with the following parameters
on your NBG-418N.
on your NBG-418N.
Follow the steps below to configure the wireless settings on your NBG-418N.
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see
logged into the Web Configurator through your LAN connection (see
1
Open the Wireless LAN > General screen in the NBG-418N’s Web Configurator.
2
Make sure the Enable Wireless LAN check box is selected.
3
Enter SSID_Example3 as the SSID and select a channel.
4
Set security mode to WPA-PSK and enter ThisismyWPA-PSKpre-sharedkey in the Pre-Shared
Key field. Click Apply.
Key field. Click Apply.
Figure 42
Tutorial: Network > Wireless LAN > General
5
Open the Status screen. Verify your wireless and wireless security settings under Device
Information and check if the WLAN connection is up under Interface Status.
Information and check if the WLAN connection is up under Interface Status.
SSID
SSID_Example3
Channel
6
Security
WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)