ZyXEL Communications nbg-418n Manual De Usuario

 Chapter 6 Wireless LAN

NBG-418N User’s Guide

The following table describes the labels in this screen. 

Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS 
status. To open this screen, click Network > Wireless LAN > WPS tab.

Network > Wireless LAN > WPS

The following table describes the labels in this screen.

Network > Wireless LAN > QoS

Enable WMM QoS

Check this to have the NBG-418N automatically give a service a priority level 
according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi 
MultiMedia Quality of Service) gives high priority to voice and video, which makes 
them run more smoothly.

Apply

Click Apply to save your changes to the NBG-418N.

Reset

Click Reset to reload the previous configuration for this screen.

Network > Wireless LAN > WPS

WPS Setup

Enable WPS

Select this to enable the WPS feature.

PIN Number

This displays a PIN number last time system generated. Click Generate to generate a 
new PIN number.

WPS Status

Status

This displays Configured when the NBG-418N has connected to a wireless network using 
WPS or when Enable WPS is selected and wireless or wireless security settings have 
been changed. The current wireless and wireless security settings also appear in the 
screen.

This displays Unconfigured if WPS is disabled and there are no wireless or wireless 
security changes on the NBG-418N or you click Release_Configuration to remove the 
configured wireless and wireless security settings.