ZyXEL Communications nbg-418n Manual De Usuario
Chapter 7 WAN
NBG-418N User’s Guide
86
WAN IP Address
The WAN IP address is an IP address for the NBG-418N, which makes it accessible from an outside
network. It is used by the NBG-418N to communicate with other devices in other networks. It can
be static (fixed) or dynamically assigned by the ISP each time the NBG-418N tries to access the
Internet.
network. It is used by the NBG-418N to communicate with other devices in other networks. It can
be static (fixed) or dynamically assigned by the ISP each time the NBG-418N tries to access the
Internet.
If your ISP assigns you a static WAN IP address, they should also assign you the subnet mask and
DNS server IP address(es) (and a gateway IP address if you use the Ethernet or ENET ENCAP
encapsulation method).
DNS server IP address(es) (and a gateway IP address if you use the Ethernet or ENET ENCAP
encapsulation method).
DNS Server Address Assignment
Use Domain Name System (DNS) to map a domain name to its corresponding IP address and vice
versa, for instance, the IP address of www.zyxel.com is 204.217.0.2. The DNS server is extremely
important because without it, you must know the IP address of a computer before you can access
it.
versa, for instance, the IP address of www.zyxel.com is 204.217.0.2. The DNS server is extremely
important because without it, you must know the IP address of a computer before you can access
it.
The NBG-418N can get the DNS server addresses in the following ways.
1
The ISP tells you the DNS server addresses, usually in the form of an information sheet, when you
sign up. If your ISP gives you DNS server addresses, manually enter them in the DNS server fields.
sign up. If your ISP gives you DNS server addresses, manually enter them in the DNS server fields.
2
If your ISP dynamically assigns the DNS server IP addresses (along with the NBG-418N’s WAN IP
address), set the DNS server fields to get the DNS server address from the ISP.
address), set the DNS server fields to get the DNS server address from the ISP.
WAN MAC Address
The MAC address screen allows users to configure the WAN port's MAC address by either using the
factory default or cloning the MAC address from a computer on your LAN. Choose Factory Default
to select the factory assigned default MAC Address.
factory default or cloning the MAC address from a computer on your LAN. Choose Factory Default
to select the factory assigned default MAC Address.
Otherwise, click Clone the computer's MAC address - IP Address and enter the IP address of
the computer on the LAN whose MAC you are cloning. Once it is successfully configured, the
address will be copied to configuration file. It is recommended that you clone the MAC address prior
to hooking up the WAN Port.
the computer on the LAN whose MAC you are cloning. Once it is successfully configured, the
address will be copied to configuration file. It is recommended that you clone the MAC address prior
to hooking up the WAN Port.
7.3 Internet Connection
Use this screen to change your NBG-418N’s Internet access settings. Click Network > WAN. The
screen differs according to the encapsulation you choose.
screen differs according to the encapsulation you choose.
7.3.1 Ethernet Encapsulation
This screen displays when you select Ethernet encapsulation.