ZyXEL Communications NWA3000-N Manual De Usuario
Chapter 6 Monitor
NWA3000-N Series User’s Guide
94
6.7 Rogue AP
Use this screen to view information about suspected rogue APs. Click Monitor >
Wireless > Rogue AP > Detected Device to access this screen.
Wireless > Rogue AP > Detected Device to access this screen.
Note: The NWA3000-N series AP or at least one of the APs the NWA3000-N series
AP is managing must be set to Monitor mode in order to detect other wireless
devices in its vicinity.
devices in its vicinity.
Figure 33 Monitor > Wireless > Rogue AP
The following table describes the labels in this screen.
Table 28 Monitor > Wireless > Rogue AP
LABEL
DESCRIPTION
Mark as Rogue
AP
AP
Click this button to mark the selected AP as a rogue AP. A rogue AP can
be contained in the Configuration > Wireless > MON Mode screen
(
be contained in the Configuration > Wireless > MON Mode screen
(
).
Mark as
Friendly AP
Friendly AP
Click this button to mark the selected AP as a friendly AP. For more on
managing friendly APs, see the Configuration > Wireless > MON
Mode screen (
managing friendly APs, see the Configuration > Wireless > MON
Mode screen (
).
#
This is the station’s index number in this list.
Status
This indicates the detected device’s status.
Device
This indicates the type of device detected.
Role
This indicates the detected device’s role (such as friendly or rogue).
MAC Address
This indicates the detected device’s MAC address.
SSID Name
This indicates the detected device’s SSID.
Channel ID
This indicates the detected device’s channel ID.
802.11 Mode
This indicates the 802.11 mode (a/b/g/n) transmitted by the detected
device.
device.
Security
This indicates the encryption method (if any) used by the detected
device.
device.
Description
This displays the detected device’s description. For more on managing
friendly and rogue APs, see the Configuration > Wireless > MON
Mode screen (
friendly and rogue APs, see the Configuration > Wireless > MON
Mode screen (
).