ZyXEL Communications 652H/HW Manual De Usuario
Prestige 652H/HW
3
2.1 Rear Panel Connections
Figure 1 Prestige Hardware Connections
Table 1 Prestige Rear Panel Description
LABEL
DESCRIPTION
1.
DSL
Connect to a telephone jack using the included phone wire.
2. LAN
1/DMZ-4
Connect to a computer/external hub using an Ethernet cable. Connect the DMZ port to servers
that you want visible to the outside world.
that you want visible to the outside world.
3.
POWER
Connect to a power source using the power adaptor for your region (see your User’s Guide).
After you’ve made the connections, connect the power adaptor to a power supply and push in the power button to
turn on the Prestige.
The PWR LED turns on. The SYS LED blinks while performing system testing and then turns steady on if the
testing is successful. A LAN LED turns on if a LAN port is properly connected.