ZyXEL Communications 782M Manual De Usuario
P782M G.SHDSL Bridge
LED
COLOR
STATUS
DESCRIPTION
Off
The Prestige does not have 10Mb Ethernet connection.
On
The Prestige has a successful Ethernet connection.
Blinking The Prestige is sending/receiving data.
xDSL Green
Off
The Prestige is not sending/receiving data.
2.2 Rear Panel and Connections of the Prestige 782
The following figure shows the rear panel of your Prestige.
Figure 2-2 Prestige 782 Rear Panel and Connections
2.2.1 xDSL Port
Connect the Prestige (port labeled xDSL) to the telephone jack using the RJ-11 cable (supplied).
2.2.2 Console Port
For the initial configuration of your Prestige, you need to use terminal emulator software on a computer and
connect it to the Prestige through the console port. Connect the 9-pin end of the console cable to the console
port of the Prestige and the other 9-pin end to a serial port (COM1, COM2 or other COM port) of your
computer. You can use an extension RS-232 cable if the enclosed one is too short.
connect it to the Prestige through the console port. Connect the 9-pin end of the console cable to the console
port of the Prestige and the other 9-pin end to a serial port (COM1, COM2 or other COM port) of your
computer. You can use an extension RS-232 cable if the enclosed one is too short.
2-2
Hardware Installation and Initial Setup