ZyXEL Communications 662HW Manual De Usuario

Prestige 662HW Series Compact Guide 

7

 

CON/AUX Green  On 

The 

CON/AUX switch is set to CON, the CON/AUX 

port is connected to a management computer and 
someone is logged into the Prestige. 

 Orange 

On 

The 

CON/AUX switch is set to AUX and the 

CON/AUX port has an Internet connection through 
a dial-up modem. 

  

Blinking 

The 

CON/AUX switch is set to AUX and the 

CON/AUX port is sending or receiving data through 
a dial-up modem or ISDN TA. 

 

 

Off 

The CON/AUX link is not ready, or has failed. 

 

3  Internet Access With Zero 

Configration  

With the Prestige’s Zero Configuration, you can access the Internet easily. Simply 
connect a computer to the Prestige and access the Internet without changing the network 
settings (such as the IP address and subnet mask) of the computer.  

Make the hardware connections and turn on the Prestige (refer to the Rear 
Panel Connections section).  

Wait until the DSL/ACT LED turns steady on. Launch your web browser 
and navigate to a web site (for example, 

). The Prestige 

automatically detects and configures your Internet connection. This may 
take about two minutes. 

If you have a PPPoE or PPPoA connection type, a screen displays 
prompting you to enter your Internet account username and/or password. 
Enter the username, password and/or service name exactly as provided by 
your ISP. Click Apply.