ZyXEL Communications USG 2000 Manual De Usuario
Chapter 5 Quick Setup
ZyWALL USG 2000 User’s Guide
85
5.5 VPN Express Wizard - Scenario
Click the Express radio button as shown in
to display the
following screen.
Figure 53 VPN Express Wizard: Step 2
Rule Name: Type the name used to identify this VPN connection (and VPN
gateway). You may use 1-31 alphanumeric characters, underscores (
gateway). You may use 1-31 alphanumeric characters, underscores (
_
), or dashes
(-), but the first character cannot be a number. This value is case-sensitive.
Select the scenario that best describes your intended VPN connection. The figure
on the left of the screen changes to match the scenario you select.
on the left of the screen changes to match the scenario you select.
• Site-to-site - Choose this if the remote IPSec device has a static IP address or a
domain name. This ZyWALL can initiate the VPN tunnel.
• Site-to-site with Dynamic Peer - Choose this if the remote IPSec device has a
dynamic IP address. Only the remote IPSec device can initiate the VPN tunnel.
• Remote Access (Server Role) - Choose this to allow incoming connections from
IPSec VPN clients. The clients have dynamic IP addresses and are also known as
dial-in users. Only the clients can initiate the VPN tunnel.
• Remote Access (Client Role) - Choose this to connect to an IPSec server. This
ZyWALL is the client (dial-in user) and can initiate the VPN tunnel.