ZyXEL Communications P-660HW-TX Manual De Usuario

P-660HW-Tx v2 Series Support Notes

(1) Configure P-660HW-Tx v2 as routing mode and configure Internet setup
parameters in Web Configurator, Advanced Setup, Network -> WAN ->
Internet Connection.

Key Settings:

Option

Description

Encapsulation

Select the correct Encapsulation type that your ISP supports. For

example, RFC 1483.

Multiplexing

Select the correct Multiplexing type that your ISP supports. For

example, LLC.

VPI & VCI

number

Specify a VPI (Virtual Path Identifier) and a VCI (Virtual Channel

Identifier) given to you by your ISP.

IP Address

Assignment

Set to Dynamic if the ISP provides the IP for the P-660HW-Tx v2

dynamically. Otherwise, set to Static and enter the IP in the IP

Address field.

(2) Configure a LAN IP for the P-660HW-Tx v2 and the DHCP settings in Web
Configurator, Advanced Setup, Network -> LAN.

3. Setup the P-660HW-Tx v2 as a DHCP Relay

• What is DHCP Relay?

DHCP stands for Dynamic Host Configuration Protocol. In addition to the
DHCP server feature, the P-660HW-Tx v2 supports the DHCP relay function.
When it is configured as DHCP server, it assigns the IP addresses to the LAN
clients. When it is configured as DHCP relay, it is responsible for forwarding
the requests and responses negotiating between the DHCP clients and the
server. See figure 1.