ZyXEL Communications P-660HNU-Fx Manual De Usuario

 Chapter 3 Tutorials

ADSL Series User’s Guide

Note: You must repeat this procedure for every device you want to add to your network 

using WPS.

In this tutorial, you manage the Doom server on a computer behind the ADSL Device. In order for 
players on the Internet (like A in the figure below) to communicate with the Doom server, you need 
to configure the port settings and IP address on the ADSL Device. Traffic should be forwarded to the 
port 666 of the Doom server computer which has an IP address of 192.168.1.34.

Tutorial: NAT Port Forwarding Setup 

You may set up the port settings by configuring the port settings for the Doom server computer 
(see 

 for more information).

Click Network Setting > NAT > Port Forwarding. Click Add new rule.

Enter the following values and then click Apply.

D=192.168.1.34

port 666

Service Name

Select User Defined.

WAN Interface

Select the WAN interface through which the Doom service is forwarded. This is 
the default interface for this example, which is MyDSLConnection.

Start/End Ports

666 

Translation Start/End Ports 666

Server IP Address

Enter the IP address of the Doom server. This is 192.168.1.34 for this example.

Protocol

Select TCP/UDP. This should be the protocol supported by the Doom server.