ZyXEL Communications 202H Manual De Usuario
Prestige 202H User’s Guide
8-14
Remote
Node
Configuration
Figure 8-7 Sample IP Addresses for LAN-to-LAN Connection
8.9 Configuring
Filter
Use Menu 11.5 – Remote Node Filter to specify the filter set(s) to apply to the incoming and outgoing
traffic between this remote node and the Prestige and also to preve.nt certain packets from triggering calls.
You can specify up to 4 filter sets separated by comma, e.g., 1, 5, 9, 12, in each filter field. The default is no
filters.
traffic between this remote node and the Prestige and also to preve.nt certain packets from triggering calls.
You can specify up to 4 filter sets separated by comma, e.g., 1, 5, 9, 12, in each filter field. The default is no
filters.
Note that spaces are accepted in this field. The Prestige comes with a prepackaged filter set, NetBIOS_WAN,
that blocks NetBIOS packets (call protocol filter = 1). You can include this in the call filter sets if you wish
to prevent NetBIOS packets from triggering calls to a remote node.
that blocks NetBIOS packets (call protocol filter = 1). You can include this in the call filter sets if you wish
to prevent NetBIOS packets from triggering calls to a remote node.
To specify remote node filters, move the cursor to the Edit Filter Sets field in Menu 11.1 – Remote Node
Profile, and use [SPACE BAR] to select Yes. Press [ENTER] to open Menu 11.5, as shown next.
Profile, and use [SPACE BAR] to select Yes. Press [ENTER] to open Menu 11.5, as shown next.