ZyXEL Communications 1000 Manual De Usuario

 Chapter 13 Interfaces

ZyWALL USG 1000 User’s Guide

When a configuration screen includes an Object References icon, select a 
configuration object and click Object References to open the Object 
References screen. This screen displays which configuration settings reference 
the selected object. The fields shown vary with the type of object.   

Text 

Authentication 

Key

This field is available if the Authentication is Text. Type the 
password for text authentication. The key can consist of alphanumeric 
characters and the underscore, and it can be up to eight characters 
long.

MD5 

Authentication 

ID

This field is available if the Authentication is MD5. Type the ID for 
MD5 authentication. The ID can be between 1 and 255.

MD5 

Authentication 

Key

This field is available if the Authentication is MD5. Type the 
password for MD5 authentication. The password can consist of 
alphanumeric characters and the underscore, and it can be up to 16 
characters long.

MAC Address 
Setting

This section appears when Interface Properties is External or 
General. Have the interface use either the factory assigned default 
MAC address, a manually specified MAC address, or clone the MAC 
address of another device or computer. 

Use Default 

MAC Address

Select this option to have the interface use the factory assigned 
default MAC address. By default, the ZyWALL uses the factory 
assigned MAC address to identify itself.

Overwrite 

Default MAC 

Address

Select this option to have the interface use a different MAC address. 
Either enter the MAC address in the fields or click Clone by host and 
enter the IP address of the device or computer whose MAC you are 
cloning. Once it is successfully configured, the address will be copied 
to the configuration file. It will not change unless you change the 
setting or upload a different configuration file. 

Related Setting

Configure 

PPPoE/PPTP

Click PPPoE/PPTP if this interface’s Internet connection uses PPPoE 
or PPTP.

Configure 

VLAN

Click VLAN if you want to configure a VLAN interface for this Ethernet 
interface.

Configure 

WAN TRUNK 

Click WAN TRUNK to go to a screen where you can set this interface 
to be part of a WAN trunk for load balancing.

Configure 

Policy Route

Click Policy Route to go to the policy route summary screen where 
you can manually associate traffic with this interface.

You must manually configure a policy route to add routing and SNAT 
settings for an interface with the Interface Type set to General. You 
can also configure a policy route to override the default routing and 
SNAT behavior for an interface with an Interface Type of Internal 
or External.

OK

Click OK to save your changes back to the ZyWALL.

Cancel

Click Cancel to exit this screen without saving.

Table 59   Configuration > Network > Interface > Ethernet > Edit (continued)