ZyXEL Communications 1000 Manual De Usuario
Chapter 51 Log and Report
ZyWALL USG 1000 User’s Guide
839
The following table describes the labels in this screen.
Table 245 Configuration > Log & Report > Log Setting > Edit (System Log)
LABEL
DESCRIPTION
E-Mail Server 1/2
Active
Select this to send log messages and alerts according to the
information in this section. You specify what kinds of log messages
are included in log information and what kinds of log messages are
included in alerts in the Active Log and Alert section.
information in this section. You specify what kinds of log messages
are included in log information and what kinds of log messages are
included in alerts in the Active Log and Alert section.
Mail Server
Type the name or IP address of the outgoing SMTP server.
Mail Subject
Type the subject line for the outgoing e-mail.
Send From
Type the e-mail address from which the outgoing e-mail is
delivered. This address is used in replies.
delivered. This address is used in replies.
Send Log To
Type the e-mail address to which the outgoing e-mail is delivered.
Send Alerts To
Type the e-mail address to which alerts are delivered.
Sending Log
Select how often log information is e-mailed. Choices are: When
Full, Hourly and When Full, Daily and When Full, and Weekly
and When Full.
Full, Hourly and When Full, Daily and When Full, and Weekly
and When Full.
Day for Sending
Log
This field is available if the log is e-mailed weekly. Select the day of
the week the log is e-mailed.
the week the log is e-mailed.
Time for Sending
Log
This field is available if the log is e-mailed weekly or daily. Select
the time of day (hours and minutes) when the log is e-mailed. Use
24-hour notation.
the time of day (hours and minutes) when the log is e-mailed. Use
24-hour notation.
SMTP
Authentication
Select this check box if it is necessary to provide a user name and
password to the SMTP server.
password to the SMTP server.
User Name
This box is effective when you select the SMTP Authentication
check box. Type the user name to provide to the SMTP server when
the log is e-mailed.
check box. Type the user name to provide to the SMTP server when
the log is e-mailed.
Password
This box is effective when you select the SMTP Authentication
check box. Type the password to provide to the SMTP server when
the log is e-mailed.
check box. Type the password to provide to the SMTP server when
the log is e-mailed.
Active Log and Alert
System log
Use the System Log drop-down list to change the log settings for
all of the log categories.
all of the log categories.
disable all logs (red X) - do not log any information for any
category for the system log or e-mail any logs to e-mail server 1 or
2.
category for the system log or e-mail any logs to e-mail server 1 or
2.
enable normal logs (green check mark) - create log messages
and alerts for all categories for the system log. If e-mail server 1 or
2 also has normal logs enabled, the ZyWALL will e-mail logs to
them.
and alerts for all categories for the system log. If e-mail server 1 or
2 also has normal logs enabled, the ZyWALL will e-mail logs to
them.
enable normal logs and debug logs (yellow check mark) -
create log messages, alerts, and debugging information for all
categories. The ZyWALL does not e-mail debugging information,
even if this setting is selected.
create log messages, alerts, and debugging information for all
categories. The ZyWALL does not e-mail debugging information,
even if this setting is selected.