ZyXEL Communications 128L Manual De Usuario

11. CLU - (Current Line Utilization) - percentage of current bandwidth 

used on this channel. 

12. ALU - (Average Line Utilization) - average CLU for this channel. 

13. Up Time - time this channel has been connected to the current 

Remote Node. 

14. Ethernet - shows the current status of  the LAN connection on 

your Prestige. 

15. Status  - shows the current status of the LAN which may be 

10M/Half Duplex, 10M/Full Duplex, 100M/Half Duplex, or 
100M/Full Duplex. Left hand side of the “/” is the speed of the 
Ethernet, and the right hand side is the mode of the Ethernet. 

16. TX Pkt - the number of transmitted packets to LAN. 

17. RX Pkt - the number of received packets from LAN. 

18. Collision - number of collisions. 

19. Name  - displays the system name of your Prestige. This information 

can be modified in Menu 1 - General Setup. 

20. RAS S/W Version - refers to the version of the current RAS 

software. 

21. IDSL F/W Version - refers to the version of the current ISDN 

firmware. 

22. Ethernet Address - refers to the Ethernet MAC address assigned 

to your Prestige. 

Users can set up different baud rates for the RS-232 connection 
through menu 24.2 Terminal Baud rate. Your Prestige supports 9600 
(default), 19200, and 38400bps for the RS-232 connection.