Carrier Access Access Navigator Manual De Usuario
6-54
August 2003
Access Navigator - Release 1.8
Electrical Installation
Verify Operation
6. Verify that status indicators now show Controller B is active.
Requirement:
CONTROLLER A POWER indicator lights green.
Requirement:
CONTROLLER B POWER indicator lights green.
Requirement:
CONTROLLER A ACTIVE/STANDBY indicator is off.
Requirement:
CONTROLLER B ACTIVE/STANDBY indicator lights green.
7. Verify that Controller B is now in active mode by entering following command:
status equipment
Requirement:
Equipment status display shows Controller B is in Active mode.
NOTE:
If status indications are not correct, refer to Diagnostics & Troubleshooting on
.
8. When you are finished with the management session, you must log out and exit from the Access
Navigator by entering the following command:
exit
Replace Front Cover
DANGER!
F
IRE
H
AZARD
. S
TANDARDS
UL 1950
AND
C22.2 N
O
. 950.95
REQUIRE
THAT
ALL
ACCESS
COVERS
BE
REPLACED
TO
PREVENT
FIRES
FROM
SPREADING
TO
NEARBY
EQUIPMENT
.
Replace front cover and tighten screws.