Carrier Access Access Navigator Manual De Usuario

To obtain online help, type the word help and press the Enter or Return key, or 

type a question mark ? after any partial command. For help features, see Online Help on 

. For detailed CLI information, see CLI Language Reference on 

.

The Access Navigator control interface uses a Command Line Interface (CLI) language. Procedures in this 
manual use the following conventions to represent input commands and output messages:

l

Input commands appear in a bold typewriter font, as in the following example:

l

If a command requires the operator to enter information, an italic typewriter font is used to show what 
item or items are required. Each item will be enclosed in < and > symbols, as in the following 
example. Do not type the < > symbols:

set ds1 <n> <setting>

l

If the operator must enter one item from a list, the items will be separated by vertical lines, as in the 
following example. Do not type the < | > symbols:

set ds1 <n> <up|down>

l

System output messages to the operator are printed in normal typewriter font, as in the following 
response to show the settings for DS1 number 13:

Settings for DS1 13:

Circuit ID:

Acme Corporation

Up/Down:

UP

Framing:

ESF

Line Coding:

B8ZS

Type:

DROP

Clock Source:

NORMAL

Line Build Out:

DSX-1 PULSE FOR 0-133 ft.