Carrier Access Access Navigator Manual De Usuario
Access Navigator - Release 1.8
August 2003
15-53
Diagnostics & Troubleshooting
Other Maintenance Commands
Other Maintenance Commands
CLI Commands
Descriptions
set autoexit <minutes>
When enabled, the CLI session will
automatically expire if there is no user
activity during the specified time
period.
automatically expire if there is no user
activity during the specified time
period.
ping <ipaddr>
.
reset all
Produces a soft reset of both
Controller cards. See Reset All on
Controller cards. See Reset All on
.
reset ds1 <n>
Enables the operator to reset one or
more DS1 framers to test Loss of
Frame recovery. Reset DS1 Framer on
more DS1 framers to test Loss of
Frame recovery. Reset DS1 Framer on
.
reset remote <n>
.
reset standby
restore defaults
Replaces the settings stored in the
Controller card’s flash memory with
the factory default values. Restore
Defaults on
Controller card’s flash memory with
the factory default values. Restore
Defaults on
switch controller
Transfers active control to the standby
Controller card. Switch Controller on
Controller card. Switch Controller on
upload tftp config <ipaddr> <"file">
<blocksize>
Reads the Access Navigator
configuration database from flash
memory and saves the settings in file
format. See Upload TFTP Config on
configuration database from flash
memory and saves the settings in file
format. See Upload TFTP Config on