Carrier Access Access Navigator Manual De Usuario
18-150
August 2003
Access Navigator - Release 1.8
CLI Language Reference
CLI Command List
Show Remote
Purpose:
Displays the port settings for the remote Access Bank II at the far end of the DS1. Use
the set remote command to change port settings.
the set remote command to change port settings.
Security:
Level 3 (monitor)
Syntax:
show remote <n|all>
Example:
show remote 9
Example:
show remote 1-5
Example:
show remote all
Message:
Settings for remote device Remote Device #11:
Remote Config: enabled
T1 Drop Port:
Line Coding: AMI
Framing: D4
Line Build Out: DSX-1 0-133 ft. (or 0 db)
PRM: AT&T
V.35 Port:
CTS: Always High
Rx Timing: Internal
Clock Inversion: None
Data Inversion: Normal
Speed: Nx64
DSU: On
RS232 Port:
Baud Rate: 9,600
Data Bits: 8
Parity: None
Stop Bits: 1
Remote Config: enabled
T1 Drop Port:
Line Coding: AMI
Framing: D4
Line Build Out: DSX-1 0-133 ft. (or 0 db)
PRM: AT&T
V.35 Port:
CTS: Always High
Rx Timing: Internal
Clock Inversion: None
Data Inversion: Normal
Speed: Nx64
DSU: On
RS232 Port:
Baud Rate: 9,600
Data Bits: 8
Parity: None
Stop Bits: 1
Description:
Field
Description
n
DS1 number, 1 to 32, or a range of numbers such as 2-8.
all
Display all DS1 remote interfaces.
Item
Description
Remote Config
enabled (on), disabled (off)
T1 Drop Port:
Line Coding
AMI, B8ZS
Framing
D4 (SF), ESF